تحولات نوین در مهندسی معدن ۲۰۱۵: راهکارهای نظری و عملی استخراج منابع معدنی ۲۰۱۵
New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining 2015

1. Cover

2. Half Title

3. Title Page

4. Copyright Page

5. Table of Contents

6. Efficiency increase of heat pump technology for waste heat recovery in coal mines

7. Anchor’s strengthening of rock walls of extraction mine workings

8. Digging plasticity water-saturated soils

9. Substantiating parameters of process design of contiguous seam mining in the Western Donbas mines

10. An overview and prospectives of practical application of the biomass gasification technology in Ukraine

11. A method for evaluation of tailings hazard

12. Features of underlying levels opening at “ArsellorMittal Kryvyi Rih” underground mine

13. Increasing of yielding of frame-anchor support steadiness

14. Solution of nonlinear programming problem by Bellman method while optimizing the two-level mining of benches in deep open pits

15. Application of the Pert method in parameters matching within the evaluator group module

16. On the issue of analytical and empirical criteria application for rock failure assessment

17. Rock state assessment at initial stage of longwall mining in terms of poor rocks of Western Donbass

18. Study of dust cloud spraying parameters in terms of its suppression

19. Technological and environmental aspects of the liquidation of coal mines

20. Application of temporary stall timbering works roadway in the process of roadway development while using continuous mining method

21. Assessment of economic efficiency AMS-A (anchor – meshwork – shotcreting) support structure in terms of coal mines

22. Development the concept of borehole underground coal gasification technology in Ukraine

23. Analytical, laboratory and bench test researches of underground coal gasification technology in National Mining University

24. Results of applying drilling and injection technologies for strengthening soil massif

25. Sorbents of purify mine waters

26. Use of geographic information systems at creation three-dimensional models of mine objects

27. The results of gas hydrates process research in porous media

28. Methodological approach to the development of gas hydrate deposits

29. Stress-and-strain state of rock mass around the working behind the longwall face

30. Current condition of damaged lands by surface mining in Ukraine and its influence on environment

31. Effective technology of stripping operations in deep coal opencasts with railway and auto truck transport

32. Mathematic model for parameter matching in evaluators group model with application of the distributed information processing principle

33. Improving enhancing methods of instrumental monitoring of rock mass geodynamics at mining ferruginous quartzite in open pits

34. The monitoring of earth surface displacements during the subsoil development

35. Determination of borehole parameters for the degassing of underworked coal seams

36. Analysis of current trends in development of mine hoists design engineering

37. Environmental aspects of waste management on coal mining enterprises

38. Research and development of software and hardware modules for testing technologies of rock mass blasting preparation

39. The level of atmospheric pollution around the iron-ore mine

40. Integrated sustaining of technogenic mine structures

41. The development of idea of tunnel unit design with the use of morphological analysis

42. Technical, economic and environmental aspects of the use of emulsion explosives by ERA brand in underground and surface mining

43. Research of drainage drift during overworking of adjacent coal seam C5 under conditions of “Samarska” mine

44. First metals discovery and development the sacral component phenomenon

45. State support of stability in coal-producing Donbas regions

46. On influence of additional members’ movability of mining vehicle on motion characteristics

47. The development of deep pits steep slope layers

48. The new method of extraction of poor and extremely poor ores in underground conditions of Vatutynske deposit (Ukraine)

49. Environmental aspects of the use of overburden rocks for hazardous waste detoxification

50. Test load envelope of semi – premium O&G pipe coupling with bayonet locks

51. Analytical modeling of the backfill massif deformations around the chamber with mining depth increase

52. The questions of main drift protection in Western Donbas coal mines

53. Rationale for the parameters equipment for rope dehydration of mining hoisting installations

54. Applying the distributed information processing principle in opencast mining design

55. Efficient land use in open-cut mining

56. Development of methodology for assessing geospatial variability of primary kaolin

57. Stochastic model of rock mass strength in terms of random distance between joints

58. Thermodynamics of multiphase flows in relation to the calculation of deep-water hydraulic hoisting

59. Assessment of groundwater rise in urban areas: Case study the city of Dnipropetrovsk

60. Effect of obturation line on protective efficiency of dust half-masks

61. The use of improved dump trucks for substantiation parameters of the deep pits trench

62. Determination of parameters effecting firedamp ignition while methane-saturated rock mass fragmentating

63. The rise in efficiency of solid fuel thermal processing under nonstationary regimes of air delivery into fluidized bed

64. Electrothermal stimulation of chemical reactions in mixture of calcite and silicon powders

65. Substantiation of coal slurry thickening rate during dewatering on vibrating screen with multi-slope working surface

66. Improving the assessment effectiveness methods of innovative industrial Leading Ukrainian Companies activity

67. Geological technology of grade mapping of non-metallic raw materials as the basis of its profitable mining

68. Influence of hydrodynamic impact on degassing of steep coal seam at the top of the overhead longwall

69. Grounds of parameters of high concentrated pulps storage technologies

70. Analysis to assess risk of occupational diseases at mining and preparation plants

71. Fundamental statements of selection mechanization structures in cyclic-flow technology

72. Probability estimates for the operation modes of mining machinery and equipment overshooting the limits of their normal functioning

73. The features of calculations of hydrotransport plants of geotechnological systems

74. Rosk mass assessment for man-made disaster risk management

75. The temporary criterion account in the metal beam-rod structure design

76. Faults and linear crusts of weathering as a gold-controlling factor

77. On some mathematical models of facility location problems of mining and concentration industry

78. Influence of dynamic processes in mine winding plants on operating safety of shafts with broken geometry

79. “Green” economy in mining

80. Dynamics of dry grinding in two-compartment separator mills

81. Modeling of vibro screening at fine classification of metallic basalt

82. On the division of leased land parcels

83. Substantiation of land management methods of industrial cities

84. Choice of supplier as a basic constituent of the logistics system

85. Differential system of the rope bolts loading during extraction drift support

86. Automated stabilization of loading capacity of coal shearer screw with controlled cutting drive

87. Optimization of the process of natural gas production stimulation from low permeable reservoirs

88. Resource-saving technology of selective mining with gob backfilling

89. Technologies of overburden rock storing in depleted or operated iron-ore open pits of Ukraine

90. On the problem of operation schedule reliability improvement in mines

91. Elements of the technology of storage gases in the gas hydrate form

92. Dynamic stability of balancing rope of skip hoists

93. Influence analysis of cross slip on friction coefficient of mine section locomotive on curvilinear rail track with intermediate medium

94. Influence of metasomatism on formation and criterion of relictness of comprehensive ore deposits confined to deep faults

95. Monitoring of mass blasting seismic impact on residencial buildings and constructions

96. Mathematical modeling of processes in transmissions of mining machines

97. Case management of product quality at the mining enterprises

98. Pulse method of magnetite demagnetizing

99. Functions and properties of a logistics system in sustainable enterprise development

100. Personal’s industrial behavior management as a tool to improve company’s effectiveness

101. Formation of marketing strategy of nonprofit organizations in Ukraine

102. Development and exploitation of storages of enrichment process wastes as anthropogenic deposits

103. Intensification of coalbed methane recovery through the surface degassing borehole

104. The findings of visual-optical method of diagnosing of rock disposal process from mine cars

105. The stress-strain state of the belt in the operating changes of the burdening conveyor parameters

106. Study of the effects of drilling string eccentricity in the borehole on the quality of its cleaning

107. Influence of different factors and physical impacts on the power of flowing supersonic jet during slag spraying in the converter

108. Some technological specialties of rail steel melting in converter