نخستین کنفرانس ملی انتقال حرارت بریتانیا: مجموعه سمپوزیوم‌های موسسه مهندسان شیمی، جلد ۱.۸۶ ۲۰۱۳
First U.K. National Conference on Heat Transfer: The Institution of Chemical Engineers Symposium Series, Volume 1.86 2013

1. Front Cover

2. First U.K. National Conference on Heat Transfer

3. Copyrigh Page

4. Table of Contents

5. Preface

6. CHAPTER 1. STEADY STATE POST-DRYOUT HEAT TRANSFER IN A VERTICAL TUBE WITH LOW INLET QUALITY

7. CHAPTER 2. INVERTED ANNULAR FILM BOILING AND THE BROMLEY MODEL

8. CHAPTER 3. CONTROL PROBLEMS IN STEADY STATE TRANSITION BOILING MEASUREMENTS

9. CHAPTER 4. THE LANGMUIR COEFFICIENT FOR HEAT AND MASS TRANSFER FOR A DROP IN SUPERHEATED VAPOUR WITH INERT GAS AND FOG PRESENT

10. CHAPTER 5. DROPLET DYNAMICS AND HEAT TRANSFER IN DISPERSED TWO-PHASE FLOW

11. CHAPTER 6. SURFACE EFFECTS IN QUENCHING OF HOT SOLIDS

12. CHAPTER 7. DEVELOPMENT OF FLOW BOILING FOLLOWING DEPRESSURISATION

13. CHAPTER 8. PRELIMINARY MEASUREMENTS OF STEAM EXPLOSION WORK YIELDS IN A CONSTRAINED SYSTEM

14. CHAPTER 9. MODELING OF CLAD FAILURE BY MELT THROUGH AND APPLICATIONS TO CABRI EXPERIMENTS USING THE PHYSURA CODE

15. CHAPTER 10. The Thermodynamics of Thermal Explosions

16. CHAPTER 11. CRITICAL DISCHARGE OF SUB-COOLED WATER AT VERY HIGH PRESSURE

17. CHAPTER 12. FORCED CONVECTION HEAT TRANSFER TO I-SECTIONS IN CROSS FLOW

18. CHAPTER 13. A SIMPLE MECHANISTIC MODEL FOR PWR REFLOOD COMPARED WITH FLECHT SEASET DATA

19. CHAPTER 14. MODELLING REFLOOD HEAT TRANSFER

20. CHAPTER 15. REVISED USER GUIDELINES FOR HEAT TRANSFER IN RELAP4/MOD6 BASED ON FLECHT-SEASET COMPARISONS

21. CHAPTER 16. COMPARISON OF CALCULATIONS USING THE BEST ESTIMATE REFLOOD HEAT TRANSFER CODE BART-A1 WITH DATA FROM THE FLECHT-SEASET FACILITY

22. CHAPTER 17. REPLOOD HEAT TRANSFER IN SEVERELY BLOCKED PWR FUEL ASSEMBLIES

23. CHAPTER 18. ANNULAR TWO PHASE FLOW IN CONSTRICTED TUBES

24. CHAPTER 19. HEAT TRANSFER DATA, INCLUDING IMPAIRMENT BY BUOYANCY, FOR A CAGR FUEL CLUSTER IN A REYNOLDS NUMBER RANGE 103 – 106

25. CHAPTER 20. BUOYANCY EFFECTS AND MIXING IN A SMALL SCALEWATER MODEL OF AN LMFBR ABOVE-CORE PLENUM

26. CHAPTER 21. A THREE-DIMENSIONAL THERMAL HYDRAULIC ANALYSIS OF THE PFR STEAM GENERATORS

27. CHAPTER 22. THE THERMAL PERFORMANCE OF SERPENTINE TUBE HEAT EXCHANGERS

28. CHAPTER 23. THE OPERATIONAL AND MAINTENANCE ASPECTS OF REACTOR PRESSURE VESSEL COOLING

29. CHAPTER 24. EXPERIMENTAL STUDY OF BUFFER STORE COOLING OF FUEL SUB-ASSEMBLIES

30. CHAPTER 25. AN ASSESSMENT OF INSTALLATION ERRORS FOR THERMOCOUPLES FITTED TO THICK-WALLED AGR FUEL PINS

31. CHAPTER 26. THE CALCULATION OF TEMPERATURES IN GAS-COOLED CLUSTERS OF FUEL PINS

32. CHAPTER 27. HEAT TRANSFER AND FLUID FLOW MEASUREMENTS NEAR THE EXIT OF A 36 PIN SIMULATED CAGR FUEL CLUSTER

33. CHAPTER 28. A COMPARISON OF MEASURED AND PREDICTED TEMPERATURES IN CAGR ON-LOAD INSTRUMENTED STRINGERS

34. CHAPTER 29. A NUMERICAI INVESTIGATION OF TURBULENT FLOW AND CONJUGATE HEAT TRANSFER IN A 4-CUSP CHANNEL

35. CHAPTER 30. THE EFFECT OF BOWING ON LOCAL HEAT TRANSFER RATES FROM RIB-ROUGHENED FUEL ELEMENTS

36. CHAPTER 31. CORRELATIONS FOR GAS-SIDE FOULING OF FINNED TUBES

37. CHAPTER 32. HEAT EXCHANGER FOULING: A STUDY OF UNDERLYING MECHANISMS FOR PARTICULATE DEPOSITION

38. CHAPTER 33. HYDRODYNAMICS EFFECTS ON PARTICULATE FOULING

39. CHAPTER 34. BIOLOGICAL-PARTICULATE FOULING INTERACTIONS: EFFECTS OF SUSPENDED PARTICLES ON BIOFILM DEVELOPMENT

40. CHAPTER 35. FOULING IN A HYDROCARBON VAPORISER

41. CHAPTER 36. THE USE OF A PORTABLE PROBE TO STUDY FOULING IN EXHAUST GAS STREAMS

42. CHAPTER 37. TECHNIQUES FOR THE EVALUATION OF SCALING INHIBITORS FOR USE IN HEAT TRANSFER EQUIPMENT

43. CHAPTER 38. REMOVAL OF CRYSTALLINE SCALE: MECHANISMS AND THE ROLE OF THERMALSTRESS

44. CHAPTER 39. GLEANING CHARACTERISTICS OF A PLATE HEAT EXCHANGER FOULED WITH TOMATO PASTE USING 2% CAUSTIC SODA SOLUTION

45. CHAPTER 40. A REVIEW OF SOME EXPERIMENTAL INVESTIGATIONS ON REGENERATORS

46. CHAPTER 41. DEVELOPMENT OF AN APPARATUS TO INVESTIGATE THE THERMAL CHARACTERISTICS OF REGENERATORS

47. CHAPTER 42. PREDICTION OF HEAT TRANSFER COEFFICIENTS FROM CYCLIC REGENERATOR AND SINGLE SHOT PACKED BED DATA

48. CHAPTER 43. THE CHARACTERISATION OF RADIAL HEAT TRANSFER IN FIXED BEDS

49. CHAPTER 44. LAMINAR FILM HEAT TRANSFER FOR COOLING OF PACKED BEDS

50. CHAPTER 45. PARTICLE-BED HEAT TRANSFER STUDIES AT THE ATOMIC ENERGY ESTABLISHMENT WINFRITH (UKAEA)

51. CHAPTER 46. THE DESIGN OF FLEXIBLE HEAT EXCHANGER NETWORKS

52. CHAPTER 47. COMPUTER-AIDED SYNTHESIS OF HEAT EXCHANGER NETWORKS; AN ITERATIVE APPROACH TO GLOBAL OPTIMUM NETWORKS

53. CHAPTER 48. AN ALGORITHM TO DEVELOP HEAT EXCHANGER NETWORKS WITH THE MINIMUM NUMBER OF STREAM SPLITS AND MAXIMUM ENERGY RECOVERY

54. CHAPTER 49. DESIGN OF OPERABLE HEAT EXCHANGER NETWORKS

55. CHAPTER 50. NEW MEASUREMENTS FOR FORCED-CONVECTION FILM CONDENSATION

56. CHAPTER 51. INVESTIGATION OF INTEGRAL-FIN-TYPE CONDENSER TUBES FOR PROCESS INDUSTRY APPLICATIONS

57. CHAPTER 52. SIMULATED CONDENSATE FILM THICKNESS AND DRAINAGE STUDIES

58. CHAPTER 53. THE PERFORMANCE CHARACTERISTICS OF A 500 MW (e) STEAM TURBINE CONDENSER AND ITS INTERACTION WITH THE AIR EXTRACTION PLANT

59. CHAPTER 54. SUBMERGENCE IN BAFFLED SHELL-AND-TUBE HEAT EXCHANGERS

60. CHAPTER 55. THE DESIGN AND USE OF PLATE HEAT EXCHANGERS IN BOILING AND CONDENSING APPLICATIONS