گزارش کارگروه درباره آلیاژهای مقاوم به خوردگی برای تولید نفت و گاز: الزامات عمومی و روش‌های آزمون برای سرویس H2S (EFC 17) ۲۰۲۲
A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production: General Requirements and Test Methods for H2S Service (EFC 17) 2022

1. Cover Page

2. Half-Title Page

3. Title Page

4. Copyright Page

5. Table of Contents

6. Series Introduction

7. Preface to the First Edition

8. Preface to the Second Edition

1. Terminology and Definitions

2. Standards Referred to in this Document

3. Introduction

4. Scope

5. Objective

6. Overview of Requirements for Selection and Qualification of CRAs for Oil and Gasfield Use

7. General Principles and Limitations of Proposed SSC/SCC Tests

8. SSC/SCC Test Procedures

17. Appendix 1: Mechanisms of Environmental Cracking

18. Appendix 2: The Source, Nature and Analysis of Produced Water in Oil and Gas sroduction

19. Appendix 3: Titanium Alloys-Limitations of Use

20. Appendix 4: Reference Environments for Comparative (or Ranking) SSC/SCC Testing that is not Application Specific

21. Appendix 5: Normalisation of Slow Strain Rate Test Ductility Measurements

22. Appendix 6: Autoclave testing of CRAs

23. Appendix 7: Stressing of Bent Beam Specimens and C-Rings

24. Supplementary Appendix S1: Test Methods for the Evaluation of the Corrosion Performance of Steels and Non-Ferrous Alloys in the System: Water-Hydrogen Sulphide- Elemental Sulphur