ایمنی و بهداشت حرفه‌ای II ۲۰۱۴
Occupational Safety and Hygiene II 2014

1. Cover Page

2. Halftitle Page

3. Title Page

4. Copyright Page

5. Table of contents

6. Foreword

7. Safety of peak less tower cranes, an accident analysis conducted by the Dutch Safety Board

8. A methodology to identify negative occupational well-being hazards

9. Causes of musculoskeletal accidents identified in official investigations

10. Assessing the inter-analyst reliability of the RIAAT process

11. Polymeric nanocomposites production risk assessment using different qualitative analyses

12. Comparative study between productivity predictive models for work in hot environments

13. Determinants of psychosocial risks

14. Occupational Health and Safety (OHS) at construction projects. A perspective from formworks & falseworks companies

15. Information and Communication Technologies (ICT) in Occupational Health and Safety (OHS) courses at engineering under/degree studies

16. Prevention through Design (PtD) concept at university. Engineering & Architecture students’ perspective

17. Prevalence of Work-related Musculoskeletal Disorders (WMSD) symptoms among milkers in the State of Paraná, Brazil

18. Real determination of metabolic rate to improve the PMV model

19. Analysis of the role of worker characteristics in three of the most frequent manufacturing accidents

20. A holistic framework for safety performance evaluation

21. Association of job-related psychosocial factors with environmental conditions in a mixed plan office: The basis for a screening proxy?

22. Incidence of musculoskeletal symptoms in industry workers

23. Influence of hot thermal environment in practice of Aerostep

24. The thermal feeling of a human being can contribute to the definition of a comfortable thermal environment to the animals

25. Methodology of chemical hazard management—a tool for occupational health promotion

26. The attitude of washing hands among the health staff

27. Scenarios and implications of ambivalence experienced by hotel managers

28. Bioaerosols in hospital environment: A short review

29. Analysis of the hearing risk and implantation of environmental improvements in workers of the industry of paper and cellulose and introduction of acoustic improvements

30. Ergonomic evaluation of the cluster during teat cup attachment

31. Risk factors of the most frequent accident types in manufacturing

32. Determination of characteristics predicting the ignition of organic dusts

33. Bibliometric Mapping to analyze the evolution of research on Ergonomics using the SciMAT tool

34. Psychosocial risks factors at work: A study of health professionals

35. Safety at construction site: Case study at the university hospital of the Federal University of Juiz de Fora

36. Integrated management system in civil construction based on PMBOK guide extension

37. Application of the HSC_PEI2012 model in construction work

38. Scholar ergonomics—primary schools in Tartu (Estonia) study case

39. Damages derived from mobbing and professional contingencies— state of the art on the Portuguese legal framework and case law

40. Evolution of skin temperature at different temperature and humidity conditions

41. Ergonomic assessment of a workstation in a paints production line

42. Formworks—maximizing the prefabrication of each set on the ground

43. Formworks—provisionally stability of the sets

44. Exposure assessment of health ionizing radiation in nuclear medicine at Coimbra

45. Risk assessment: Information for qualitative estimation of probability and severity in high risk work context

46. Occupational risks behind teaching activity

47. Noise exposure and military police: A review

48. Occupational exposure to particulate matter and fungi in a composting plant—case study in Portugal

49. Safety culture and labor accidents in the town councils in the District of Leiria

50. A study regarding the ergonomic conditions in an area of winding transformers

51. Respiratory function study in a group of car repair workers

52. Simultaneity of risk in the civil site construction: An analysis of accumulated risk

53. High-Density surface Electromyography applications & reliability vs. muscle fatigue—a short review

54. Dispersion of quarry’s dust—pilot study

55. Study of Radon in dwellings—case study in Moimenta da Beira

56. Occupational exposure to car workshops air pollutants

57. Food safety of transported meals in primary schools and kindergartens

58. Eco-construction—contribution to occupational risk occurrence

59. Risk exposure prevention tool to health care workers

60. The construction of the Brazil colony: The role played by the carpenters

61. Safety analysis in the building construction carpentry work

62. Elementáis ergonomic constituents for administratives environments

63. Research on occupational exposure to radon in Portuguese thermal spas

64. Vibration and tipping of agricultural machinery: A reality to be adjusted

65. Noise emission levels during spinning classes and the effects on workers’ health

66. A model for assessing maturity of Integrated Management Systems

67. Effects of indoor air quality on respiratory function of children in the 1st cycle of basic education of Coimbra, Portugal

68. Risk analysis and reliability assessment of energy facilities

69. Microbiological parameters of surfaces in school canteens

70. Good practices of hygienic processes on NEMI’s professionals

71. Conceptual model of competency profile for work equipment inspections

72. Assessment levels of dustiness—case study applied to technicians of gel nails

73. Assessment of electromagnetic fields in arc and resistance welding

74. Influence of pedal use in developing of chronic low back pain and work disability

75. 3D anthropometric data collection for occupational ergonomics purposes: A review

76. Occupational hygiene and work safety in a shoe company in Campina Grande

77. Safety management at small establishments with major hazards: The case of galvanic industry

78. Qualitative evaluation of occupational exposure to chemical agents in a workplace of a research laboratory

79. Some constraints in the evacuation—a short review

80. Can the external environment affect the occupational safety conditions and unsafety behaviours?

81. Screening for psychoactive substances at the workplace—a review

82. Ergonomic and anthropometric evaluation of a footwear modification: A case study

83. Cultural and linguistic adaptation and validation of the long version of Copenhagen Psychosocial Questionnaire II (COPSOQ II) in Portuguese

84. Anthropometric study of the student population of a Portuguese faculty

85. Variability management: A still to be noticed role of workers

86. Whole Body Vibration in open pit mining—a short review

87. Factors affecting the safety in Portuguese architectural heritage works

88. Patterns of Whole-Body Vibrations in open pit mining

89. Tracking Surgical Instruments: From a management perspective to safety issues

90. Occupational noise and hearing loss in a metalworking company

91. Analysis of FEUP school furniture’s suitability

92. Modern machines: How to set up the health of the pilot?

93. Chemical agents exposure prevention: A training effectiveness approach

94. Safety management on a refinery maintenance turnaround

95. Safety footwear and its protective components, a way to promote health and safety at work

96. Crawler excavator track repair: Track fastening—noise characterization and personal protection

97. Assessment of the performance of globe thermometers under different environmental conditions

98. Different transposed legislation analysis in safety matter for construction sites: Three study cases

99. Preventive measures in the execution of metallic structures in Portugal

100. Preventive measures in rehabilitation of buildings—facades shoring

101. Assessment of the health and safety plan on Vila Nova de Gaia county

102. Stakeholder’s perspectives on accident causes in rehabilitation and maintenance work in Portugal and Brazil

103. Evaluation of indoor thermal environment of a manufacturing industry

104. Analysis of correlation between unsafe actions and unsafe conditions in the constitution of occupational accidents—case study

105. Proposal for evaluation of heat stress on the activity of vehicular patrolling by military police in Paraiba—Brazil

106. Take the risk by others: Working conditions and health of workers of private security

107. Occupational noise exposure in gyms of county of Coimbra

108. Ergonomic service quality of the elderly on the example of the financial market

109. Indoor Air Quality (IAQ) in the living rooms in homes for the elderly—case study in the county of Pombal

110. Occupational exposure noise—case study of a quarter of firefighters in center region

111. Risk factors associated with musculoskeletal symptoms in footwear sewing workers

112. Environmental risks: A systematic review

113. Prevalence of WMSD in the sewing sector of two companies of the footwear industry

114. Industrial hygiene and safety of work in a manufacturing industry profiles aluminum

115. Ergonomic method for the implementation of occupational safety systems

116. A review of effects from exposure to static magnetic fields in magnetic resonance imaging

117. Ergonomic model of hotel service quality for the elderly and people with disabilities

118. Safety in the work environment of a company in the textile in Campina Grande-PB—Brazil

119. Exposure assessment to ionizing radiation in the manufacture of phosphate fertilizer

120. Shiftwork experience: Worker’s vision of its impacts

121. Ergonomic conditions of work bus urban driver and bus collector

122. A study of associations of occupational accidents to number of employees, and to hours worked

123. 3D human thermoregulation model: Bioheat transfer in tissues and small vessels

124. Work organization and the interfaces with occupational stress

125. Key elements to effective emergency management in a school complex

126. A study on the reality of Portuguese companies about work health and safety

127. Influence of rotating shiftwork in health and performance of air traffic controller: A review

128. Perception of risk inherent in the working conditions of women agricultural workers in northeastern Brazil

129. Self-rated health, social factors and life style among farmers in Brazil

130. Prevalence of chronic pain and associated factors in administrative assistants of a Brazilian university

131. Occupational risks in a workplace of a metallurgical in Paraiba—Brazil

132. One-way coupling between a CFD model and a transient thermal model of the human body

133. The importance of ergonomics analysis in prevention of MSDs: Exploratory study in Swedwood-Portugal

134. Environmental risks in a company in the food sector in Campina Grande, PB

135. Recent application of infrared thermography in work-related musculoskeletal disorders

136. Ergonomic work analysis of swing arm cutting machine by RULA method

137. Evaluation of sidewalks on a busy avenue in a Brazilian metropolis

138. Occurrence of pain in metals industry workers and its relation to work

139. A proposal for the use of serious games in occupational safety

140. Summer parties in Algarve—DJs and audience noise exposure

141. Occupational risks of accident at a work: A case study in footwear industry in Paraiba—Brazil

142. Identification and proposition of preventive measures for environmental risks on a t-shirts factory in Campina Grande, Brazil

143. Noise pollution in a shopping center of Konya (Turkey)

144. Contributions to the design of Emergency Management Intelligent Systems

145. User-centered design of the interface prototype of a BI intelligence mobile application

146. Occupational noise exposure during pregnancy: A systematic review