مواد در مهندسی محیط زیست: مجموعه مقالات چهارمین کنفرانس بین‌المللی سالانه در علوم مواد و مهندسی محیط زیست ۲۰۱۷
Materials in Environmental Engineering: Proceedings of the 4th Annual International Conference on Materials Science and Environmental Engineering 2017

1. Cover

2. Titlepage

3. Copyright

4. Contents

5. Keynote Speech I Strategies for Improving Hydropower Development

6. Keynote Speech II Biotemplated Mesoporous Materials for Wastewater Treatments

7. Keynote Speech III Design of Hard and Superhard Nanocomposites for Harsh Environment

8. Keynote Speech IV Numerical Simulation of Slag Corrosion Behavior of Lightweight Refractories for Refining Ladles

9. Keynote Speech V Precision Plastic Forming of Large Complex Component of Ti-Alloy

10. Study about the Landslide Deformation Forecast Model Based on Kalman Filter Method and Taylor Seris and Material Properties

11. Effects of Machining Process and Heat Treatment on the Mechanical Properties and Microstructure of TB2 Titanium Alloy Strip

12. Study on Compound Characteristics of Oleic Acid, Glycerol and Organic Ester in Grinding Fluid

13. Novel Room-Temperature Molten Salt Based on Chlorine Chloride with Hydrogen Bond Donors

14. Study on Organic Modification of Aluminum Powder Coating

15. Study on Material of Exothermic Insulation Riser Sleeve

16. The Efficiency Calculation of Cobalt Oxide for Artificial Photosynthesis with Exponential-Doping

17. Microscale Hierarchical Three-Dimensional Flowerlike CuO: Synthesis, Characterization, and its Supernormal Photocatalytic Activity under Visible Light Irradiation

18. The Distribution Behavior of Phosphorus at Non-Equilibrium Condition Simulating the Casting Ladle

19. Effects of Zr Addition on the Microstructure and Mechanical Properties of AlCoCrFeNiZrx High-Entropy Alloys

20. Research and Preparation of Super Hydrophobic and Self-Cleaning PVDF Membrane

21. Preparation and Characterization of TiB2 Coatings with Ultra-Low Residual Stress

22. Crystal Structure and Microwave Dielectric Properties of Ca [(Li1/3Nb2/3) 0.9Zr0.1]O3-δ−xTiO2 ceramics

23. Mechanism of Mechanochemical Reactions in Magnesium-Aluminium Layered Double Hydroxides Systems

24. Deposition of Diamond Films on Complex Cutting Tools by Hot-Filament Chemical Vapor Deposition

25. The Crystal Unit Model of CsI(Tl) Film with Hexagon Microcolumns and Its Conversion Factor to X-Ray

26. Effect of Ion Etching on the Surface Morphology, Structure and Adhesive Strength of the TiN Coating

27. Influences of Photocatalytic Activity by TiO2 Doping with Graphene Oxide and Lanthanum on the Carrier of Cenosphere

28. Synthesis and Luminescence Properties of Eu3+-Doped NaTb(MoO4)2 Hierarchical Microcrystals

29. PtxNi/meso-Al2O3 (x = 0.60–2.07): High-Performance Catalysts for the Hydrogenation of N-Butanal at Low Temperatures

30. Hysteretic Behavior of CFT Columns with Semi-Rigid Base Connection under Different Loading Modes

31. Behavior of Liquid Phase Generation of High Phosphorus Oolitic Hematite during Sinter

32. Influence of the UUV Body on the Performance of the Propeller

33. Piezoresistivity of Polyethylene Terephthalate Nickel Powder Composite

34. Preparation of Ti-Cu Alloying Surface Layer on Ti6Al4V Substrate via Friction Stir Processing for Flame-Retardant Performance

35. Failure Analysis of Escalator Step Induced by the Bolt Surface Defects

36. Surface Wear Mechanism of Escalator Step Chain: A Failure Analysis

37. Toxicity Reduction Mechanism of ZnO NPs during Sludge Vermicomposting Process

38. A Nanocomposite Film of Polyoxometalate and TiO2: Preparation, Characterization and Photochromic Property

39. Application of Inductively Couled Plasma-Mass Spectrometry to the Speciation Analysis of Rare Earth Elements in Ion-Adsorption Rare Earth Ore

40. Electronic Structure of Cu2ZnSn1-xGexS4 New Energy Materials Probed by Soft X-Ray Absorption Spectroscopy

41. Preparation and Performance of a Chitosan/TiO2 Composite Film by Lyer-by-Layer Method

42. A Facile Route to Synthetize Lanthanum Doped Titanium Dioxide Films for Improved Photocatalytic Performance

43. Contact Property of Au on p-InP

44. Effect of Polyethylene Oxide Concentration on Separation Performance of PVDF Hollow Fiber Plasma Separation Membrane

45. Influence of Phosphate Concentration and PH Crystallization of Magnesium Ammonium Phosphate (MAP)

46. Microstructure and Corrosion Resistance of CrMoVNbFex High-entropy Alloys

47. Finite Element Analysis of Composite Shear Walls with Double Steel Plates and Filled Concrete for a Nuclear Island Structure under In-Plane Loading

48. Exothermal Combustion Synthesis of the Composites TiB2/Ni from Ni–Ti–B System

49. Research on Wetting Characteristics of Normal Acid, Alcohol and Alkane on Surface of Monocrystal Silicon

50. Effect of Modified Argon Oxygen Decarburization (AOD) Stainless Steel Slag on Cementitious Properties

51. Optimization of structure Design of Physical Vapour Transport Furnace for Silicon Carbide (SiC) Crystal Growth via Numerical Simulation

52. Thermodynamical Analysis of the Spontaneous Combustion of FeS

53. Cause and Prediction Model of Low Infrared Emissivity for Resin/Flaky Metal Composite Coatings

54. Synthesis and Characterization of Modified Carbon Aerogels

55. A Review on the Application of Photocatalytic Materials

56. The Preparation of Nano ZnO/PVC and the Photocatalytic Degration of Waste Water from Seafood Processing

57. Efficient Adsorptive Removal of Arsenic from Water by Titanium-Based Metal-Organic Frameworks (MIL-125)

58. The Research of SVG in Three-Phase Four-Wire Power System

59. The Application of CDMA Technology in the Measurement of Antenna Array

60. Synthesis and Bactericidal Properties of MgO/TiO2 Nano-Composites

61. Effects of Assisting Agents Concentrations on Energy Consumption during the Electrokinetic Treatment of Contaminated Kaolin

62. Development of a Solid State pH Sensor Based on Electrodeposited Iridium Oxide Films for Water Quality Detection

63. Simple Fabrication of ZnO Hierarchical Structures with Enhanced Photocatalytic Activity

64. Enhanced Cycling Stability of Multi-Cations Doped Spinel Lithium Manganese Oxide for Rechargeable Lithium Batteries

65. Review on the Applications of Phase Change Materials (PCMs) for Building Envelopes

66. Damage Analysis of Cast Iron Specimen with Different Crack Forms

67. Study on the Performance of a High-Pressure Water Jet Dust Collector in a Powder Feeding Port of Explosive Sites

68. Self-Assembled Grapheme / Carbon Nanotube Fibers as Electrodes for Super Capacitors

69. Fatigue Life Prediction of a Kind of Frequently-used Bolt under Random Excitations

70. Research on Development of Armor Protection Materials and Technology

71. Cold forming Cracking Reason and Solution Method of SS400 Hot Rolled Steel

72. Effect of Flow Rate of Cooling Water on the Interfacial Heat Transfer Coefficient between Modular Water-Cooled Mold and Casting

73. Study on High-Absorption Chrome Tanning Technology Assisted by CO2 Low Temperature Plasma Treatment

74. Simulation of Q345 Steel Billet Solidification Microstructure in Continuous Casting Based on Matlab

75. Preparation and Properties of Neopentyl Glycol/Epoxy Resin Composite Phase Change Material for Thermal Energy Storage

76. Hysteric Property Analysis for Semi-Rigid Base Connection of Concrete-Filled Square Steel Tubular Columns

77. An Adaptive Harmonic Current Detection for Improving the Power Quality in Power Grid

78. Paper Fiber Paper-Based ZnO Piezoelectric Nanogenerator for Self-Powered Energy Scavenging

79. Fabrication of Super-Hydrophobic Surface with Micro- Nano-Structure on Brass Substrate by Chemical Etching and Surface Modification

80. Preparation Technology and Experimental of Hydro-Thermal Method on Surface Modification of Biomedical Titanium

81. The Co-Pilot Position of Vehicle Noise Quality Prediction Based on SVM

82. Application of Aramid Fiber in Printed Circuit Board

83. Online Intelligent Sorting Method of Gold Ore based on LIBS Technology

84. Rapid Decolorization and Mineralization of Congo Red Using Fe78Si9B13Amorphous Alloy by Photo Fenton-Like Process

85. Preparation of Ce, N-Codoped Mesoporous Titania Photocatalyst with High Photocatalytic Activity under Visible Light

86. Preparation of TiO2/AC Composite and Characterization of Its Photocatalytic Activities

87. Electrocatalytic Oxidation Degradation of Reactive Red 2

88. Nanoscale Fe0 Supported on Three-Dimensional Graphene for the Removal of Methyl Orange from Water

89. Study on the Optimal Extraction of Coal Resources under the Constraint of Ecological Environment

90. Research on the Stability Calculation and Treatments of the Liyu Landslide in Zhuzhou City, Center Hunan Province

91. Procurement Cost Control of New Energy Vehicles Manufacturing Enterprise under Supply Chain Management

92. Domino Effect Index for Chemical Plants Based on Fishbone Analysis

93. Xinjiang Wind Power under “the Belt and Road Initiatives” Facing the Opportunities and Challenges

94. Analysis of the Fuel Efficiency of Airport End-Around Taxiway

95. Spatiotemporal Analysis on Pesticide Using in different Agriculture Lands over China

96. Policy Analysis and Capability Evaluation of China’s Cities in Response to Climate Change

97. Analysis of the Influence of Environmental Conditions on Individual SEFAE Rocket

98. Residual Characteristics of Organochlorine Pesticides in Four Kinds of Plants in Qingshitan Reservoir Region

99. Application and Research Progress of Toxicity Test of Daphnia Magna

100. Literature Mining-oriented Risk Management of Climate Change

101. Economic Evaluation of Renewable Energy Saving Technology Based on Analytic Hierarchy Process and Data Envelopment Analysis Method

102. Study on Modified Zeolite for Absorption of Fluoride in Water

103. Removal of Heavy Metal Ions from Aqeous Solution Using Bottom Ash as an Adsorbent

104. Research Progress of N2O O Production in Different Wastewater Treatment Processes

105. Application of Alternative Environmental Protection Leather in Clothing

106. The Application of Green Environmental Protection Material in Clothing Design

107. Full-Flow Balance Analysis of Copper in Municipal Wastewater Treatment Plant of Hardware Electron-Mechanical Industrial Area

108. Study on Biological Treatment -Fenton -Oxidation Treatment -Biological Treated Landfill Leachate

109. Normal Section Bearing Capacity Test on Columns Composed by Fine Slag Aggregate Concrete

110. A Nonlinear Rheological Model for Rocks Considering the Tertiary Creep Stage

111. Construction of Multilayer Geo-Metadata Management System

112. Automobile Body Shop Optimization Design of Displacement Ventilation

113. The Research Progress of Polycyclic Aromatic Hydrocarbons Processing Technology in Coking Wastewater

114. Experimental Investigation on Flexural Properties of Sisal Fiber Reinforced Foam Concrete

115. Reservoir Modeling Constrained by Geological Conceptual Patterns of DC Oilfield in Llanos Basin

116. Numerical Simulation of Mold Surface Built-up Welding Temperature Field Based on ANSYS

117. Adsorption of β - HCH on Constructed Wetland Substrates

118. Structure and Spatial Distribution of Greenhouse Gas Emissions from Livestock and Poultry Manure Management

119. Study on Assimilable Organic Carbon (AOC) and Influencing Factors in Northern Living District Water Distribution System

120. A New Magnetic Pb (II)-Imprinted Polymer as a Highly Selective Sorbent for Preconcentration and Determination of Lead Ions in Wastewater Samples

121. Analysis on the Characteristics of Smog Pollution in the Urban Centre of Chongqing Municipal

122. Remote Sensing Monitoring Analysis of Typical Islands in Paracel Islands

123. The Structural Character and Optimal Design of Canal Aqueduct

124. Different Aqueduct Structure Make and Design

125. Liquefaction Technology of Rice Husk in Polyhydric Alcohols

126. Study on Engineering Example of Risk Based Inspection and Verification of Acoustic Emission Inspection for Storage Tank Group

127. Experimental Setup for Boron Meter Accuracy Analysis in Nuclear Reactor Environment

128. Effects of Material Dispersion on Heat Transfer Analysis of Integrated Thermal Protection Systems

129. Dust Pollution Emission Characteristics and Dust Suppression Effect of Porous Windbreak and Large Strip Warehouse Based on Wind Tunnel Experiments

130. Removal of Cadmium, Iron and Sulfate from Synthetic Acid Rock Drainage Using Metal-Tolerant Sulfate Reducing Bacterial Sludge

131. Measures to Prevent Subsea Wellhead Instability for Deepwater Drilling

132. Simultaneous Analysis of Methanol, Ethyl Acetate and Fusel Oil in Wine

133. Influence on Wetting Performance by Polarity Difference between Organic Acid and Organic Alcohol

134. Evaluation and Application of Poverty Index Water Based on Principal Component Analysis

135. Research Progress on Degradation of Polycyclic Aromatic Hydrocarbons in Cooking Flue Gas

136. Measurements of Contact Angles for CO2- Brine-Berea Sandstones System at Reservoir Conditions

137. The Numerical Simulation of the Surface Settlement and the Pile Horizontal Displacement Caused by the Foundation Pit Dewatering

138. A Study on the Influence of Integrative Structure Combined with Subway Station and Underground Passage under Dynamic Load of Subway Train

139. Research on Three-Dimensional Topographic Characteristics of Tensile Cement Stone Crack Surface

140. Diurnal Fluctuations in Oxygen Release from Roots of Phragmites Australis in Constructed Wetland Systems

141. Different Detection Methods for HPLC Analysis of Fatty Acid Methyl Esters in Biodiesel

142. Measurement and Analysis of Sound Absorption Coefficient by the Method of Reverberation Chamber and Impedance Tube

143. The Influence of Boundary Conditions on Sound Field in Long Space

144. Two Methods of Measuring Reverberation Time and Sound Absorption Coefficient in Reverberation Room

145. Investigation of Heat Transfer of a Square Impinging Air Jet on a Flat Surface using Thermochromic Liquid Crystal Sheet

146. Drying Behavior of Fluidized Bed Dried Peppercorns